Optiflow Filter System Volvo V70 III D3

The BSR Optiflow Filter kit consists of an open air filter and a custom-made shield, including all installation parts.
The advantages of the Optiflow filter are:
- The Sports Filter with low air resistance, gives quicker throttle response
- Ensures supply of cold and oxygen rich air
- Sporty intake sound, especially noticeable during acceleration (can be heard inside vehicle)
- Sporty engine compartment
- Washable filter components (cotton fabric)
- Delivered pre oiled and ready for assembly

The shield plate is made in Sweden and powder coated.

It is very important to follow the Maintenance Instructions for Performance Air Filter.
It must be cleaned and oiled at least every 10 000 - 15 000 km, depending on season and road type.

The BSR Opti Flow Filter kit consists of an open air filter and a custom stainless heat shield, including all installation parts.
The advantages of the Opti Flow filter are:
- The Sports Filter with low air resistance, gives quicker throttle response
- Ensures supply of cold, oxygen rich air
- Sporty intake resonance, noticeable during vigorous acceleration (can be heard inside vehicle)
- Gives a subtle sports look to the engine bay
- Washable filter components (cotton fabric)
- Will protect your engine against particles as small as 2.8 micron.

The shield plate is made in Sweden from stainless steel, finished in black powder-coat.

It is very important to follow the Installation & Maintenance Instructions for Sport Air Filter.

PLEASE NOTE; On all polyurethane filters, the hose clamp must only be tightened until a seal is made & the filter is not loose. If the clamp is tightened any further, it will cut into the material and the flange will crack. Filters must be installed with support (black foam is ideal) underneath ensuring minimal movement, which may also cause flange damage.
Filter must be washed and oiled at least every 10 000-15 000 km, depending on season and road type.